Assembly. - TM-9-2320-279-20-10564

TM 9-2320-279-20-1

Fuel System Maintenance Instructions (Cont)

4.10. FUEL-WATER SEPARATOR REMOVAL/REPAIR/INSTALLATION (CONT).

d. Assembly.

NOTE

There are two models of fuel-water separators. Model A has two screws in each bracket

Model B has one screw in each bracket. Do step (1) for Model A and Step (1.1) for Model B.

(1)

Install two brackets (1) on cylinder (2) with four screws (3), washers (4), and nuts (5). Do not

tighten at this time.

(1.1) Install two brackets (1) on cylinder (2) with two screws (3), washers (4), and nuts (5). Do not

tighten at this time.

(2) Install gasket (6), ball (7), battle (8), and centrifuge (9) in lower end of cylinder (2).

(3) Install gasket (10) and cylinder ring (11) to cylinder (2).

Change 3