REAR WINCH DRIVE CHAIN REMOVAL, REPLACEMENT AND ADJUSTMENT (TRUCK M543A2).

TM 9-2320-211-20-3-2

REAR WINCH DRIVE CHAIN REMOVAL, REPLACEMENT AND

ADJUSTMENT (TRUCK M543A2).

TOOLS: 3/4-inch box wrench

3/4-inch socket wrench

Pliers

6-inch steel ruler

3/4-inch torque wrench, 150 pound-feet capacity

SUPPLIES:

50-inch long cord

Shims (as needed)

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

a. Preliminary Procedure. Set rear winch control lever to NEUTRAL position.

Refer to TM 9-2320-211-10.

b. Removal.

FRAME

Using 3/4-inch box wrench, hold two nuts (1). Using 3/4-inch socket wrench,

unscrew two screws (2) three turns. Do not take off nuts.

2. Using 3/4-inch box wrench, unscrew two nuts (3) three turns. Do not take

off nuts.

GO TO FRAME 2