Bleeding Master Cylinder.

TM 9-2320-211-20-3-1

FRAME 1

Connect bleeder tank to master cylinder. Refer to para 12-14a.

Using clean cloth, clean bleeding screw (1) on master cylinder ( 2).

Put 3/8-inch wrench on bleeding screw ( 1).

Put one end of bleeding hose (3) on bleeding screw (1) .

Put other end of bleeding hose (3) into transparent container ( 4). Put

hydraulic fluid into container until container is 1/2 full. Make sure that

end of bleeding hose is below the level of hydraulic fluid in container.

GO TO FRAME 2