POWER DIVIDER-TO-BEVEL GEARCASE PROPELLER SHAFT REMOVAL AND REPLACEMENT (TRUCK M543A2)

TM 9-2320-211-20-3-1

POWER DIVIDER-TO-BEVEL GEARCASE PROPELLER SHAFT REMOVAL

AND REPLACEMENT (TRUCK M543A2).

Hammer

TOOLS: l/2-inch wrench

9/16-inch ratchet

9/16-inch wrench

10-inch extension

Pliers

15/16-inch wrench (2)

No. 3 cross-tip screwdriver

Chisel

(Phillips type)

Hoist

Flat-tip screwdriver

SUPPLIES: None

PERSONNEL: TWO

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

a. Removal.

Working under truck, using hammer and chisel, tap open lock tabs (1).

2. Working under truck, using l/2-inch wrench, unscrew and take out four

screws (2) with lockplates (3) from power divider input shaft yoke (4).

3. Pull down rear end of power takeoff propeller shaft (5).

GO TO FRAME 2