Section VII. ENGINE STARTING AIDS

TM 9-2320-211-20-3-1

MANIFOLD HEATER ELECTRIC FUEL SUPPLY PUMP AND FUEL FILTER

REMOVAL AND REPLACEMENT.

9/16-inchwrench (2)

TOOLS : 3/8-inch wrench

72-inch socket wrench

7/16-inch wrench

Pliers

11/16-inch wrench

SUPPLIES: Clean rags

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

a. Preliminary Procedures.

(1) Open hood. Refer to TM 9-2320-211-10.

(2) Disconnect battery ground cable. Refer topara 7-44.

b . Removal.

NOTE

Use rags to catch fuel which may drip out of fuel lines

and pump assembly.

Unscrew and take off electrical connector (l).

Using 3/8-inchwrench, unscrew and take off tube adapter (2) with tube (3).

Using7/16-inchwrench, unscrew and take off tube adapter (4) with tube (5).

Using l/2-inch socket wrench, unscrew and take out two screws with washers

(6). Take out fuel pump and filter (7).

TO FRAME 2