FUEL LINES AND FITTINGS REMOVAL AND REPLACEMENT.

TM 9-2320-211-20-3-1

4-11. FUEL LINES AND FITTINGS REMOVAL AND REPLACEMENT.

NOTE

Procedures given are typical and cover all the

different types of installations that you will

find on the trucks. Procedures do not show

any one truck system. Refer to system sche-

matic illustrations used as support diagrams

for troubleshooting each system (Vol 2, Part

TOOLS: 3/4-inch combination box and open end wrench

5/8-inch combination box and open end wrench

7/16-inch combination box and open end wrench (2)

1/2-inch combination box and open end wrench

9/16-inch combination box and open end wrench

11/16-inch combination box and open end wrench

Container

Sealer compound, type II, MIL-S-45180

SUPPLIES:

Rags

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

WARNING

Smoking, flames, sparks and glowing or

hot objects are not allowed within 50 feet

of work area during maintenance of fuel

system components. Fuel can explode,

causing injury to personnel and damage

to equipment.

4-38