Ammunition Data Card (DD Form 1650)

TM 9-1330-200-34/TM 1330-34/1

normal manner, except that the interfix number will start

(b) Block 2. Change NSN, depending

with 500 instead of 1 and the manufacturer's symbol will

on type of package used.

be that of the facility performing the work

of item represented by data card. Indicate reworked lot

(3) Regrouping. Regrouping or mixing of

by using applicable alphabetical suffix specified in

grenade ammunition lots will be permitted only when

authorization document for removation of item.

grenades are assembled with new fuzes from the same

(d) Block 4.

Change activity,

fuze lot. AMSMC-QAD will assign an identification

depending agency performing renovation.

symbol for relotting when required.

(e) Block 5.

Change quantity,

depending on number of rejects generated and quantity

3-9. Ammunition Data Card (DD Form 1650)

used.

(f) Block 8. Indicate PRON on work

order number.

a. General. An Ammunition Data Card (DD Form

(g) Block 9.

Reflect latest drawing

1650) (fig. 3-3) is a historical record of all required data

number.

pertaining to each lot of the item. Data cards will be

(h) Blocks 11-13.

Change start,

prepared when relotting grenades or whenever a suffix

is assigned to the existing lot number. Data cards will

completion, and inspection dates.

be distributed as follows:

(i) Block 23. For loaded items, furnish

information

for

each

component

part

(e.g.,

subassembly, explosive, propellant, or other material

(1) Commander

used in assembly of loaded item described by data

US Army Armament, Munitions and

card). For inert items manufactured by more than one

Chemical Command

manufacturer, compile data as follows:

ATTN: AMSMC-QAD

Rock Island, IL 61299-6000

2 copies

1. Component.

Give approved

item name.

(2) Recipient of the ammunition (other depot,

2. Drawing

Number.

Enter

ASP, etc.)-2 copies

drawing number, revision letter and applied E.O.'s, if

any.

3. Model. Enter model number for

b. Reproduction and Format. Copies of original

any item or subassembly to which model number has

data cards, if not locally available, may be requested

been assigned.

from Commander,

Army

Armament,

4. Manufacturer. Give name of

Munitions and Chemical Command, ATTN: AMSMC-

manufacturer of each lot of each component used. If

QAD, Rock Island, IL 61299-6000. Data cards will be 5

any parts are furnished by supplier not identified in block

x 8 inches in size and printed on commercial manila tag

7, furnish complete information required for loaded

board (or equal), and of approximately 200 pounds ream

item description (i.e., identity of supplier, date

weight.

Local reproduction of the blank form is

manufacture, lot number, and quantity).

authorized.

Data cards may be hand printed or

5. Date

Manufactured. Enter

reproduced by mimeograph, offset printing, and

month and year (if available) during which each lot of

individual typing, provided the product results in a clean,

each component was made.

black image that lends itself to 35mm microfilm

reduction.

6. Lot Number. Enter complete lot

number of each component used in loading item.

c. Required Information. Complete Ammunition

Data Card in accordance with following instructions:

(1) Maintenance.

(a) Blocks 1 through 26, as applicable,

except 2-5, 8-9, 11-13, 23-23a and 26. Transcribe

information contained in basic data card to new card.

3-6