A-FRAME - STABILIZER LEG AND STABILIZER CYLINDER

TM 5-5420-279-23

A-FRAME - STABILIZER LEG AND STABILIZER CYLINDER

This task covers:

a. Remove

b. Install

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Materials Required

Thread locking compound, loctite 243

Grease (As required)

Personnel Required

Two

Equipment Conditions

A-Frame Unfolded and Rotated to 60 degrees

WARNING

CRUSH INJURY. THE STABILIZER LEG IS HEAVY.

INJURY FROM EXTREME HYDRAULIC OIL PRESSURE. THE SYSTEM MUST BE

DE-PRESSURIZED BEFORE CARRYING OUT ANY WORK ON THE STABILIZER

CYLINDER.

SLIP AND FALL INJURY. PERSONNEL MAY SLIP ON SPILLED HYDRAULIC

FLUID. SUITABLE CONTAINERS AND FLUID ABSORBENT MATERIALS ARE TO

BE USED TO CONTAIN SPILLAGE.

NOTE

This procedure details the Remove of the Stabilizer Leg and the Stabilizer Cylinder. The A-

Frame Stabilizer Outer Leg Lower Bearing Pads may also be accessed during this

procedure.

6-10 Change 1