FIRST ENGINE START (GPU START)-continued

TM 1-1510-223-MTF

PROCEDURE

TROUBLESHOOTING

REFERENCE

NOTE

Do not start the engines until after the INS is placed into the

NAV mode or OFF as required.

Exterior light switches - As required.

Fire guard - Posted.

Propeller area - Clear.

# 1 ENG START switch - START- IGNITION. # 1

IGN ON annunciator should illuminate and # 1

FUEL PRESS annunciator should extinguish.

NOTE

False fuel flow indication may be observed with the starter-

generator engaged and the CONDITION lever in FUEL

CUTOFF.

CAUTION

If ignition does not occur within 10 seconds after moving

CONDITION lever to LOW IDLE, initiate Abort Start

procedure. If for any reason a starting attempt is discontinued,

the entire starting sequence must be repeated after allowing

the engine to come to a complete stop (1 minute minimum).

CONDITION lever (after N1, RPM passes 13%

minimum) - LOW IDLE.

2-37