Section V. RESPONSIBILITIES OF TMDE SUPPORT COORDINATORS

TB 750-25

c. Army TMDE calibrated by a contractor must be calibrated at intervals

established IAW TB 43-180 or DA Form 3758-R.

Section V. RESPONSIBILITIES OF TMDE SUPPORT COORDINATORS

3-8. General

a. This section provides information and instructions for TMDE support

coordinators and outlines their responsibilities. It provides guidance and acquaints

TMDE support coordinators with the procedures required to enable them to monitor

their units' implementation of the Army TMDE support program.

b. The TMDE support coordinator is the key person for all matters pertaining to

TMDE support for their unit. In accordance with AR 750-43, the installation/command

TMDE support coordinator will be assigned the responsibility to monitor the TMDE

support program. The TMDE support coordinator is the owner/user's primary contact

for all TMDE matters and should establish and maintain a good working relationship

with the TSA.

3-9. TMDE Support Coordinator Training

a. The successful implementation of the TMDE support program depends, to a

large extent, upon unit/installation TMDE support coordinators. Thus, it is imperative

that appropriate and adequate training is made available to TMDE support coordinators

Army wide.

b. A CD-ROM based TMDE support coordinator training program is available to

all TSAs. The training program may be used in conjunction with appropriate local

directives and SOPs to form a customized training package for local coordinators. TSAs

will ensure training packages and assistance are provided to all TMDE support

coordinators.

3-10. TMDE Support Coordinator's Duties

a. The organizational structure of different activities may require the TMDE

support coordinator to perform other duties, but there are certain specific requirements

for this duty which are listed below. This list is not necessarily all inclusive.

(1) Serves as the units central point of contact for matters concerning TMDE

calibration and repair support.

(2) Develops/implements SOP(s) for identification and control of TMDE

requiring calibration and repair support.

Change 1

3-5