FRAME 3 - TM-9-2920-225-340046

TM 9-2920-225-34

Check that preformed packings (1 and 2) and seal (3) are not damaged or

worn. If packings or seal are damaged, generator is nonrepairable.

Check that drive end housing (4), bearing retainer (5), and sleeve spacer

(6) are not cracked, warped or damaged. If parts are damaged, generator

is nonrepairable.

Measure inside diameter of drive housing bearing bore (7). Bore must be

2.0471 to 2.0477 inches. If bore is not within given limits, generator is

non-repairable.

GO TO FRAME 4

NOTE

CHECK ONLY THOSE PARTS WHICH

ARE CALLED OUT IN THIS FRAME.

PARTS WITHOUT CALLOUTS ARE

SHOWN FOR REFERENCE PURPOSES

OR ARE CHECKED IN ANOTHER FRAME.

TA103530

2-30