|
|
TM 9-2815-210-34-2-2
1.
P u t in oil drain hose adapter (1).
2.
P u t oil drain gasket (2) on turbocharger oil drain mounting flange (3).
NOTE
Make sure that two hose clamps (4) are on oil drain hose (5).
H o s e clamps should be loose and near center of drain hose
as shown.
S l i d e oil drain hose (5) onto end of oil drain tube (6).
3.
L i f t breather tube and bracket (7) up and out of the way of turbocharger oil
4.
d r a i n mounting flange (3).
S l i d e oil drain hose (5) over oil drain hose adapter (1). Hold oil drain tube
5.
f l a n g e (8) against turbocharger oil drain mounting flange (3) so that mount-
i n g holes line up.
L e t breather tube and bracket (7) down so that bracket rests on oil drain
6.
t u b e f l a n g e ( 8 ) . Hole in bracket should line up with hole in oil drain tube
flange.
P u t in two screws (9) and lockwashers (10).
7.
S l i d e two hose clamps (4) to ends of oil drain hose (5) and tighten clamps.
8.
GO TO FRAME 4
5-196
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |