FRAME 3 - TM-9-2815-210-34-2-20470

TM 9-2815-210-34-2-2

FRAME 3

NOTE

Readings must be within limits given in table 4-62.

T h e letter T shows a tight fit. If readings are not

within given limits, throw away part and get a new one.

M e a s u r e diameter of four retaining pins (1).

M e a s u r e inside diameter of four retaining pin bores (2) in pulley (3).

M e a s u r e fit of retaining pin (1) to bore in pulley (3). If fit is not within

given limits, throw away item with the most wear and get a new one.

M e a s u r e inside diameter of bore (4) in pulley (5).

M e a s u r e outside diameter of four sleeve bearings (6).

M e a s u r e inside diameter of four sleeve bearings (6) in pulley (5).

M e a s u r e fit of retaining pin (1) in sleeve bearing (6). If fit is not within --

given

limits, throw away item with the most wear and get a new one.

GO TO FRAME 4

4-450