|
|
TM 9-2815-210-34-2-2
(2)
Cleaning.
FRAME
1
WARNING
D r y cleaning solvent is flammable. Do not use near an
o p e n flame. Keep a fire extinguisher nearby when solvent
i s used. Use only in well-ventilated places. Failure to do
this may result in injury to personnel and damage to
equipment.
CAUTION
D o not put hydraulic pump (1) in dry cleaning solvent.
P a r t s can be damaged and pump will not run properly.
1.
C l e a n hydraulic pump (1) with dry cleaning solvent. Use a stiff brush to
t a k e off carbon and sludge. Dry with clean cloth.
2.
C l e a n adapter (2), drive gear (3), manifold assembly (4), elbow (5), three
screws (6), nut (7), woodruff key (8), and two nuts (9) in dry cleaning
solvent.
Use stiff brush to remove carbon and sludge. Dry with clean
cloth.
END OF TASK
4-361
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |