FRAME 14 - TM-9-2815-210-34-2-20194

TM 9-2815-210-34-2-2

FRAME 14

NOTE

Readings must be within limits given in table 4-34. The

letter L shows a loose fit. If readings are not within

given limits, get a new oil pump.

Measure inside diameter of driven impeller bushing (1).

Measure o u t s i d e diameter of driven impeller shaft (2).

Measure f i t of driven impeller shaft (2) in driven impeller bushing (1).

Measure d e p t h of pressure pump driven impeller bore (3).

Measure l e n g t h A of pressure pump driven impeller (4).

Measure c l e a r a n c e between pressure pump driven impeller (4) and top of

pressure pump drive impeller bore (3). -

GO TO FRAME 15

4-174