FRAME 52

TM 9-2815-210-34-2-2

FRAME 52

NOTE

Main bearing caps (1) and bearing saddles (2) are called

by numbers one to seven counting from front to rear of

crankcase (3).

Put number six main bearing cap (1) on number six bearing saddle (2).

Mounting holes in number six main bearing cap must line up with screw holes

i n number six bearing saddle.

C o a t two bolts (4) and washers (5) lightly with engine lubricating oil. Put in

a n d hand tighten two bolts and washers.

U s i n g torque wrench, tighten two bolts (4) to 80 to 90 pound-feet.

U s i n g torque wrench, tighten two bolts (4) to 115 to 120 pound-feet.

GO TO FRAME 53

4-76