FRAME 44

TM 9-2815-210-34-2-2

FRAME

NOTE

Main bearing caps (1) and bearing saddles (2) are called

by numbers one to seven counting from front to rear of

crankcase (3).

Number two main bearing cap (1) has a flat mounting sur-

face (4) for mounting oil pump.

Put number two main bearing cap (1) on number two bearing saddle (2).

Mounting holes in number two main bearing cap must line up with screw

h o l e s in number two bearing saddle.

C o a t two bolts (5) and washers (6) lightly with engine lubricating oil, Put

i n and hand tighten two bolts and washers.

U s i n g torque wrench, tighten two bolts (5) to 80 to 90 pound-feet.

U s i n g torque wrench, tighten two bolts (5) to 115 to 120 pound-feet.

GO TO FRAME 45

4-68