FRAME 31 - TM-9-2815-210-34-2-20069

TM 9-2815-210-34-2-2

FRAME

NOTE

F o u r different crankshafts (2) can be used in these en-

g i n e s . T h e y differ in the diameters of the main bearing

j o u r n a l s and connecting rod journals. The four crank-

s h a f t s a r e : e a r l y model standard size, late model stand-

ard

size,

0.0100-inch

undersize,

and

0.0200-inch

under-

size.

L o o k at flywheel mounting face (1) of crankshaft (2). If no number is

s t a m p e d here, this is a standard size crankshaft. Note this for future use.

L o o k at flywheel mounting face (1) of crankshaft (2). If the number 0.010

o r 0.0100 is stamped here, this is a 0.0100-inch undersize crankshaft. Note

t h i s for future use.

L o o k at flywheel mounting face (1) of crankshaft (2). If the number 0.020

o r 0.0200 is stamped here, this is a 0.0200-inch undersize crankshaft. Note

t h i s for future use.

IF CRANKSHAFT (2) WAS CHANGED DURING THIS TASK, GO TO FRAME 32.

IF CRANKSHAFT (2) WAS NOT CHANGED DURING THIS TASK, GO TO FRAME 34

4-49