TM-9-2815-210-34-2-2

• MAINTENANCE, DIRECT SUPPORT AND GENERAL SUPPORT LEVEL ENGINE ASSEMBLYI DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
• WARNING
• WARNING - Cont
• TABLE OF CONTENTS
• TABLE OF CONTENTS-CONT
• TABLE OF CONTENTS-CONT
• TABLE OF CONTENTS-CONT
• TABLE OF CONTENTS-CONT
• TABLE OF CONTENTS-CONT
• TABLE OF CONTENTS-CONT
• TABLE OF CONTENTS-CONT
• TABLE OF CONTENTS-CONT
• TABLE OF CONTENTS-CONT
• TABLE OF CONTENTS-CONT
• TABLE OF CONTENTS-CONT
• LIST OF ILLUSTRATIONS
• LIST OF TABLES
• LIST OF TABLES - CONT
• LIST OF TABLES - CONT
• Chapter 4.CLEANING, INSPECTION, AND REPAIR
• Section III. CLEANING, INSPECTION, AND REPAIR OF ENGINE COMPONENTS AND ACCESSORIES
• SUPPLIES
• CRANKCASE ASSEMBLY, CRANKSHAFT, AND CAMSHAFT.
• Removal of Pipe Plugs and Inspection of Expansion Plugs.
• Removal of Pipe Plugs and Inspection of Expansion Plugs. (cont)
• Removal of Expansion Plugs and Crankcase to Cylinder Head Studs.
• Removal of Expansion Plugs and Crankcase to Cylinder Head Studs. (cont)
• Removal of Expansion Plugs and Crankcase to Cylinder Head Studs. (cont)
• Cleaning.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• Inspection and Repair of Crankcase and Crankshaft.
• Table 4-1. Oil Pump Idler Gear Shaft Wear Limits
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• FRAME 8
• FRAME 9
• FRAME 10
• FRAME 11
• FRAME 12
• FRAME 13
• FRAME 14
• Table 4-2. Crankshaft Bushing Type Pilot Bearing Wear Limits
• FRAME 16
• FRAME 17
• Table 4-3. Crankshaft Pilot Bearing and Bore Wear Limits
• FRAME 18
• FRAME 19
• FRAME 20
• FRAME 21
• FRAME 22
• Table 4-5. 0.0100-Inch Undersize Crankshaft Main Bearing Journals Wear Limits
• Table 4-6. 0.0200-Inch Undersize Crankshaft Main Bearing Journals Wear Limits
• FRAME 25
• FRAME 26
• FRAME 27
• FRAME 28
• FRAME 29
• FRAME 30
• Table 4-10. Crankshaft Thrust Bearing Journal, Crankshaft Pulley End, Crankshaft Gear, and Crankshaft Damper and Pulley Wear Limits
• FRAME 31
• FRAME 32
• FRAME 33
• FRAME 34
• FRAME 35
• Table 4-11. Main Thrust Bearing Half Wear Limits
• FRAME 36
• Table 4-12. Main Thrust Bearing Half and Saddle Wear Limits
• FRAME 37
• Table 4-13. Crankshaft Main Thrust Bearings and Journal Wear Limits
• FRAME 38
• FRAME 39
• Table 4-14. Standard Size Crankshaft Main Bearing Half Wear Limits
• FRAME 40
• Table 4-15. 0.0100-Inch Undersize Crankshaft Main Bearing Half Wear Limits
• FRAME 41
• Table 4-16. 0. 0200-Inch Undersize Crankshaft Main Bearing Half Wear Limits
• FRAME 42
• FRAME 43
• FRAME 44
• FRAME 45
• FRAME 46
• FRAME 47
• FRAME 48
• FRAME 49
• FRAME 50
• FRAME 51
• FRAME 52
• FRAME 53
• FRAME 54
• FRAME 55
• FRAME 56
• FRAME 57
• FRAME 58
• FRAME 59
• FRAME 60
• FRAME 61
• FRAME 62
• FRAME 63
• FRAME 64
• FRAME 65
• FRAME 66
• FRAME 67
• FRAME 68
• FRAME 69
• Table 4-17. Standard Size Crankshaft Main Bearings and Oil Clearance Wear Limits
• FRAME 70
• FRAME 71
• Table 4-18. 0.0100-Inch Undersize Crankshaft Main Bearings and Oil Clearance Wear Limits
• FRAME 72
• FRAME 73
• Table 4-19. 0.0200-Inch Undersize Crankshaft Main Bearings and Oil Clearance Wear Limits
• FRAME 74
• FRAME 75
• FRAME 76
• Inspection and Repair of Camshaft and Related Camshaft Parts.
• FRAME 2
• FRAME 3
• Table 4-20. Camshaft Thrust Plate Wear Limits
• FRAME 5
• Table 4-21. Camshaft Gear Wear Limits
• Table 4-22. Camshaft Journals Wear Limits
• FRAME 8
• Table 4-23. Camshaft Bearing Wear Limits
• Table 4-24. Camshaft Bearing Bore Wear Limits
• FRAME 11
• FRAME 12
• Table 4-25. Rear Camshaft Journals and Camshaft Bearings Wear Limits
• Table 4-26. Front Camshaft Journals and Camshaft Bearings Wear Limits
• Inspection and Repair of Valve Tappets.
• FRAME 2
• Table 4-27. Valve Tappet Bores and Valve Tappet Wear Limits
• Inspection and Repair of Cylinder Bores and Cylinder Sleeves.
• Table 4-28. Cylinder Bore Wear Limits
• FRAME 3
• FRAME 4
• Table 4-29. Cylinder Sleeve Wear Limits
• Replacement of Expansions Plugs, Pipe Plugs, and Crankcase to Cylinder Head Studs
• FRAME 2
• FRAME 3
• PISTONS, CONNECTING RODS, AND RELATED PARTS.
• FRAME 2
• Inspection and Repair.
• FRAME 2
• FRAME 3
• CRANKSHAFT REAR OIL SEAL HOUSING.
• FRAME 2
• Figure 4-1. Rear Oil Seal Housing Drain Hole Machine Shop Instructions.
• AIR COMPRESSOR SUPPORT.
• Inspection and Repair.
• TAPPET CHAMBER COVER.
• FUEL INJECTOR PUMP ADAPTER.
• ENGINE FRONT PLATE ASSEMBLY.
• OIL PUMP IDLER GEAR.
• COOLANT DRAIN COCK AND OIL PRESSURE TRANSMITTER.
• Inspection and Repair.
• OIL GAGE ROD, ROD SUPPORT, AND SUPPORT BRACKET.
• Inspection and Repair.
• OIL PAN
• Cleaning
• FRAME 2
• Assembly.
• OIL PUMP ASSEMBLY AND OIL PUMP TUBES.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• Cleaning.
• Engines LDS-465-1, LDS-465-1A, and LDS-465-2
• Oil pump assembly
• FRAME-1
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• FRAME 8
• FRAME 9
• FRAME 10
• Table 4-30. Early Model Oil Pump Pressure Relief Valve Wear Limits
• FRAME 11
• Table 4-31. Late Model Oil Pump Pressure Relief Valve Wear Limits
• FRAME 12
• Table 4-32. Oil Pump Impeller Shaft and Bushing Type Bearings Wear Limits
• Table 4-33. Oil Pump Impeller Drive Shaft and Bushing Wear Limits
• FRAME 14
• Table 4-34. Oil Pump Driven Impeller, Impeller Bore, Impeller Shaft, and Impeller Bushing Wear Limits
• Table 4-35. Oil Pump Drive Impeller and Impeller Bore Wear Limits
• FRAME 16
• Table 4-36. Scavenge Oil Pump Impellers and Impeller Bores Wear Limits
• FRAME 17
• Table 4-37. Engine LDS-465-2 Oil Pump Pressure Relief Valve Wear Limits
• FRAME 18
• Table 4-38. Engine LDS-465-2 Oil Pump Impeller Drive Shaft and Bushings Wear Limits
• Table 4-39. Engine LDS-465-2 Oil Pump Driven Impeller Shaft Wear Limits
• Table 4-40. Engine LDS-465-2 Pressure Pump Driven Impeller and Driven Impeller Bore Wear Limits
• Table 4-41. Engine LDS-465-2 Pressure Pump Drive Impeller and Drive Impeller Bore Wear Limits
• Table 4-42. Engine LDS-465-2 Scavenge Pump Driven Impeller and Impeller Bore Wear Limits
• Table 4-43. Engine LDS-465-2 Scavenge Pump Drive Impeller and Impeller Bore Wear Limits
• Assembly.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• Figure 4-2. Typical Oil Pump Test Setup.
• Figure 4-3. Pressure Relief Valve Shims.
• OIL PRESSURE REGULATOR VALVE HOUSING ASSEMBLY.
• Cleaning.
• Inspection and Repair.
• FRAME 2
• FRAME 3
• Table 4-44. Early Model Oil Pressure Regulator Valve Plunger Spring Wear Limits
• Table 4-45. Late Model Oil Pressure Regulator Valve Plunger Spring Wear Limits
• FRAME 6
• Table 4-46. Oil Pressure Regulator Valve Housing Wear Limits
• Assembly.
• CYLINDER HEAD ASSEMBLIES.
• FRAME 2
• Cleaning.
• Inspection and Repair.
• FRAME 2
• Figure 4-4. Cylinder Head Sealing Plate Fabrication Instructions.
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• FRAME 8
• FRAME 9
• FRAME 10
• FRAME 11
• FRAME 12
• Table 4-47. Valve Guides and Valve Guide Bores Wear Limits
• FRAME 14
• FRAME 15
• FRAME 16
• FRAME 17
• Figure 4-5. Valve Seats and Valves Machining Specifications.
• FRAME 18
• FRAME 19
• FRAME 20
• FRAME 21
• Table 4-48. Intake Valve Seat Inserts and Counterbores Wear Limits
• FRAME 22
• FRAME 23
• Table 4-49. Exhaust Valve Seat Inserts and Counterbores Wear Limits
• FRAME 24
• Valves
• FRAME 2
• Figure 4-6. Valve Grinding Specifications.
• Table 4-50. Intake and Exhaust Valve Length Wear Limits
• FRAME 4
• Table 4-51. Intake Valves and Guides Wear Limits
• Table 4-52. Exhaust Valves and Guides Wear Limits
• FRAME 7
• Table 4-53. Early Model Cylinder Head Intake Valves and Guides Wear Limits
• Table 4-55. Inner Valve Springs Wear Limits
• Table 4-56. Outer Valve Springs Wear Limits
• FRAME 3
• Valve rotors.
• FRAME 2
• Assembly.
• FRAME 2
• VALVE ROCKER ARM PUSH RODS.
• VALVE ROCKER ARMS AND SHAFTS.
• FRAME 2
• FRAME 3
• FRAME 4
• Cleaning.
• Inspection and Repair.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• Table 4-57. Valve Rocker Arm Bearings and Shafts Wear Limits
• Table 4-58. Valve Rocker Arm Thrust Spring Wear Limits
• Assembly.
• FRAME 2
• FRAME 3
• FRAME 4
• CYLINDER HEAD COVERS
• Inspection and Repair.
• FRAME 2
• TACHOMETER ADAPTER.
• FRAME 2
• All Engines Except LDS-465-2.
• FRAME 2
• CRANKCASE BREATHER TUBE ADAPTER.
• CRANKCASE BREATHER TUBE (ALL ENGINES EXCEPT LDS-465-2).
• FRAME 2
• Inspection and Repair.
• CRANKCASE BREATHER VALVE ASSEMBLY (ENGINE LDS-465-2).
• FRAME 2
• Cleaning.
• Inspection and Repair.
• FRAME 2
• Assembly.
• FRAME 2
• FRAME 3
• FRAME 4
• AIR PRESSURIZATION TUBES AND FITTINGS (ENGINE LDS-465-2).
• FRAME 2
• Inspection and Repair.
• FLYWHEEL HOUSING.
• FRAME 2
• Cleaning.
• Inspection and repair.
• Assembly.
• FRAME 2
• Engines LDS-465-1 and LDS-465-1A.
• FRAME 2
• Cleaning.
• Inspection and repair.
• Assembly.
• Engines LD-465-1, LD-465-1C, and LDT-465-1C.
• Cleaning.
• Inspection and repair.
• Assembly.
• FLYWHEEL ASSEMBLY.
• FRAME 2
• FRAME 2
• OIL FILTER BODY ASSEMBLY.
• Cleaning
• Assembly.
• OIL COOLER AND FILTER HOUSING.
• Cleaning.
• Inspection and Repair.
• FRAME 2
• FRAME 3
• Table 4-59. Oil Cooler and Filter Housing Assembly Wear Limits
• Table 4-60. Oil Cooler and Filter Bypass Valve Springs Wear Limits
• FRAME 6
• Assembly
• FUEL INJECTION PUMP OIL HOSE.
• Inspection and Repair.
• FUEL FILTER ASSEMBLY.
• FRAME 2
• FRAME 3
• FRAME 4
• Cleaning.
• FRAME 2
• Inspection and repair.
• Table 4-61. Fuel Filter Pressure Relief Valve Wear Limits
• FRAME 2
• Assembly.
• FRAME 2
• FRAME 3
• FRAME 4
• Engine LDS-465-2.
• FRAME 2
• Cleaning.
• Inspection and repair.
• Assembly.
• FRAME 2
• FRAME 3
• Engine LDS-465-1.
• Cleaning.
• Inspection and repair.
• Assembly.
• FRAME 2
• FUEL FILTER HOSES AND RELATED PARTS.
• Inspection and repair.
• Engine LDS-465-2.
• Inspection and repair.
• Engines LD-465-1, LD-465-1C, LDT-465-1C, and LDS-465-1A.
• Inspection and repair.
• FUEL INJECTION PUMP ATTACHING PARTS.
• FRAME 2
• HYDRAULIC PUMP AND ADAPTER ASSEMBLY (ENGINES LDS-465-1, LDS-465-1A , AND LDS-465-2).
• FRAME 2
• Cleaning.
• Inspection and repair.
• FRAME 2
• FRAME 3
• Assembly.
• FRAME 2
• FRAME 3
• Engines LDS-465-1 and LDS-465-1A.
• FRAME 2
• FRAME 3
• Cleaning.
• Inspection and repair.
• FRAME 2
• FRAME 3
• Assembly.
• FRAME 2
• FRAME 3
• FUEL INJECTOR TUBE ASSEMBLIES AND ATTACHING PARTS.
• Inspection and repair.
• FRAME 2
• FRAME 3
• All Engines Except LDS-465-2.
• FRAME 2
• Inspection and repair.
• FRAME 2
• FRAME 3
• FUEL INJECTOR FUEL RETURN TUBES.
• Inspection and Repair.
• FRAME 2
• OIL COOLER AND OIL COOLER COVER.
• Inspection and Repair.
• FRAME 2
• Leakage Test.
• FUEL INJECTOR NOZZLE AND HOLDER ASSEMBLIES.
• FRAME 2
• Adjustment of adjusting screw type nozzle.
• FRAME 2
• Adjustment of shim type nozzle.
• Nozzle leakage check.
• Nozzle spray pattern check
• Nozzle chatter check.
• Disassembly.
• FRAME 2
• Shim. type nozzle and holder assembly.
• FRAME 2
• Cleaning.
• FRAME 2
• FRAME 3
• Inspection and Repair.
• FRAME 2
• Assembly.
• FRAME 2
• Shim type nozzle and valve holder.
• FRAME 2
• THERMOSTAT HOUSING
• Cleaning.
• FRAME 2
• Inspection and Repair.
• FRAME 2
• Assembly.
• CYLINDER HEAD WATER OUTLET MANIFOLDS.
• Inspection and Repair.
• Assembly.
• INTAKE MANIFOLD.
• Inspection and Repair.
• FRAME 2
• Assembly.
• WATER PUMP AND RELATED PARTS.
• EXHAUST MANIFOLD ASSEMBLY.
• Cleaning.
• Inspection and Repair.
• Assembly.
• TURBOCHARGER OIL DRAIN HOSE, OIL DRAIN AND INLET TUBES, AND RELATED PARTS (ENGINES LDT-465-1C, LDS-465-1, LDS-465-1A, AND LDS-465-2).
• FRAME 2
• Inspection and Repair.
• FRAME 2
• TURBOCHARGER EXHAUST ELBOW OR ADAPTER (ENGINE LDS-465-1).
• Inspection and Repair.
• FRAME 2
• FRAME 3
• Assembly.
• INTAKE MANIFOLD ELBOW ASSEMBLY.
• Inspection and Repair.
• AIR COMPRESSOR ASSEMBLY.
• FRAME 2
• FRAME 3
• FRAME 4
• Inspection and repair.
• FRAME 2
• FRAME 3
• Table 4-62. Air Compressor Pulley Pins, Hub, and Sleeve-Type Bearings (Engine LDS-465-2) Wear Limits
• Table 4-63. Air Compressor Bearing Sleeve and Pulley Spring (Engine LDS-465-2) Wear Limits
• Assembly and replacement.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• Air Compressor Intake Air Cleaner.
• FRAME 2
• Cleaning.
• Inspection and repair.
• Replacement.
• FRAME 2
• Air Compressor Discharge Manifold.
• Inspection and repair.
• Replacement.
• Air Compressor Unloader Valve.
• Cleaning.
• Inspection and repair.
• Replacement.
• Air Compressor.
• Inspection and repair.
• GENERATOR MOUNTING BRACKET, ADJUSTING STRAP, AND PULLEY.
• Cleaning.
• Inspection and Repair.
• FRAME 2
• Assembly.
• ENGINE FAN.
• FRAME 2
• FAN, GENERATOR, AND AIR COMPRESSOR DRIVE BELTS.
• Inspection and repair.
• All Engines Except LDS-465-2.
• Inspection and repair.
• HYDRAULIC PUMP OIL RESERVOIR (ENGINE LDS-465-2).
• FRAME 2
• Inspection and Repair.
• FRAME 2
• FRAME 3
• Assembly.
• FRAME 2
• HYDRAULIC PUMP OIL HOSES (ENGINE LDS-465-2)
• FRAME 2
• Inspection and Repair.
• FRAME 2
• FRAME 3
• FAN IDLER PULLEY AND ARM ASSEMBLY AND RELATED PARTS (ENGINE LDS-465-2).
• FRAME 2
• FRAME 3
• FRAME 4
• Cleaning.
• FRAME 2
• Inspection and Repair.
• FRAME 2
• FRAME 3
• FRAME 4
• Assembly
• FRAME 2
• FRAME 3
• FRAME 4
• CLUTCH AND TRANSMISSION DRIVE PLATES.
• Engines LDS-465-1 and LDS-465-1A.
• Engine LDS-465-2.
• Inspection.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• Repair.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FUEL INJECTION PUMP DRIVE GEAR ACCESS COVER (ENGINES LD-465-1, LD-465-1C, AND LDT-465-1C).
• FLAME HEATER SPARK PLUG (UNCOVERED SYSTEM).
• Repair.
• FLAME HEATER IGNITION UNIT (UNCOVERED SYSTEM).
• Inspection and Repair.
• FLAME HEATER WIRING HARNESS AND ELECTRICAL LEAD ASSEMBLY (UNCOVERED SYSTEM).
• FLAME HEATER FUEL PUMP (UNCOVERED SYSTEM).
• Inspection.
• Relief Valve Adjustment.
• FRAME 2
• Flow Test.
• FLAME HEATER NOZZLE AND VALVE ASSEMBLY (UNCOVERED SYSTEM).
• Repair.
• Spray Pattern Test.
• FRAME 2
• FRAME 3
• FRAME 4
• Leak Test
• FRAME 2
• FRAME 3
• FLAME HEATER TUBES, CLAMPS, AND FITTINGS (UNCOVERED SYSTEM).
• Inspection and Repair.
• FRAME 2
• FRAME 3
• FLAME HEATER SPARK PLUG (COVERED SYSTEM).
• Repair.
• FLAME HEATER IGNITION UNIT (COVERED SYSTEM).
• Inspection.
• FLAME HEATER FUEL PUMP (COVERED SYSTEM).
• Inspection.
• Relief Valve Adjustment.
• FRAME 2
• Flow test.
• FLAME HEATER WIRING HARNESS AND ELECTRICAL LEAD ASSEMBLY (COVERED SYSTEM).
• FLAME HEATER NOZZLE AND VALVE ASSEMBLY (COVERED SYSTEM).
• Repair.
• Spray Pattern Test.
• FRAME 2
• FRAME 3
• FRAME 4
• Leak test
• FRAME 2
• FRAME 3
• FLAME HEATER TUBES, CLAMPS, AND FITTINGS (COVERED SYSTEM).
• Inspection and Repair.
• FRAME 2
• FRAME 3
• FRAME 4
• FLAME HEATER COVER AND BRACKET (COVERED SYSTEM).
• Repair.
• FLAME HEATER SOLENOID VALVES (SIDE-MOUNTED SYSTEM).
• FRAME 2
• Cleaning.
• FRAME 2
• Replacement.
• FRAME 2
• FLAME HEATER REPLACEABLE ELEMENT FILTER (SIDE-MOUNTED SYSTEM).
• Disassembly.
• Cleaning.
• Assembly.
• Replacement.
• FLAME HEATER FUEL PUMP (SIDE-MOUNTED SYSTEM).
• Replacement.
• FLAME HEATER NOZZLE AND VALVE ASSEMBLY (SIDE-MOUNTED SYSTEM).
• Repair.
• Spray Pattern Test.
• FRAME 2
• FRAME 3
• FRAME 4
• Leak Test
• FRAME 2
• FRAME 3
• FLAME HEATER SYSTEM SPARK PLUG (SIDE-MOUNTED SYSTEM).
• Repair.
• FLAME HEATER BRACKET (SIDE-MOUNTED SYSTEM).
• FLAME HEATER NONREPLACEABLE ELEMENT FILTER (SIDE-MOUNTED SYSTEM)
• Replacement.
• FLAME HEATER TUBES, CLAMPS, AND FITTINGS (SIDE-MOUNTED SYSTEM).
• Inspection and Repair.
• TIMING GEAR COVER.
• All engines except LDS-465-2.
• Inspection and Repair.
• FRAME 2
• FRAME 3
• All engines except LDS-465-2.
• FRAME 2
• Chapter 5. FINAL ASSEMBLY
• MOUNTING CYLINDER BLOCK ON OVERHAUL STAND.
• FRAME 2
• FRAME 3
• FRAME 4
• CAMSHAFT ASSEMBLY, CAMSHAFT REAR BEARING PLUG AND PISTON COOLING NOZZLES.
• Camshaft Rear Bearing Plug.
• Piston Cooling Nozzles.
• CRANKSHAFT ASSEMBLY AND ENGINE FRONT PLATE.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• FRAME 8
• FRAME 9
• FRAME 10
• FRAME 11
• CRANKSHAFT GEAR AND CAMSHAFT GEAR.
• FRAME 2
• FRAME 3
• FRAME 4
• CRANKSHAFT REAR OIL SEAL AND HOUSING.
• FRAME 2
• CRANKSHAFT DIRT AND LIQUID DEFLECTOR TIMING GEAR COVER, TACHOMETER ADAPTER, AND CRANKSHAFT DAMPER AND PULLEY ASSEMBLY.
• Timing Gear Cover.
• Tachometer Adapter.
• FRAME 2
• Crankshaft Damper and Pulley Assembly.
• Figure 5-1. Damper Pulley Locator Fabrication Instructions.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• PISTON AND CONNECTING RODS, AND PISTON COOLING NOZZLES ADJUSTMENT.
• FRAME 2
• FRAME 3
• FRAME 4
• Piston Cooling Nozzles Adjustment (Engines LDS-465-1A and LDS-465-2).
• Figure 5-2. Oil Pressure Regulator Valve Adapter Fabrication Instructions.
• FRAME 2
• FRAME 3
• FRAME 4
• OIL PUMP ASSEMBLY, OIL PUMP TUBES, AND OIL PAN.
• FRAME 2
• Oil Pump Tubes.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• Oil Pan.
• FRAME 2
• FRAME 3
• FRAME 4
• CYLINDER HEAD.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• ENGINE LIFTING BRACKETS.
• Front Lifting Bracket.
• Engine LDS-465-2.
• MOUNTING ENGINE ON TRANSPORT STAND.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FLYWHEEL HOUSING.
• FRAME 2
• FRAME 3
• Flywheel Housing Face Runout Check.
• Flywheel Housing Rim Out-of-Round Check.
• FLYWHEEL AND CLUTCH.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• Engine LDS-465-2.
• FRAME 2
• FRAME 3
• Clutch.
• FRAME 2
• Engines LDS-465-1 and LDS-465-1A.
• FRAME 2
• ROCKER ARMS, ROCKER ARM PUSH RODS, AND VALVE TAPPETS.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• INTAKE AND EXHAUST MANIFOLD AND OIL LEVEL GAGE SUPPORT TUBE BRACKET
• FRAME 2
• FRAME 3
• FRAME 4
• CYLINDER HEAD WATER OUTLET MANIFOLDS.
• WATER PUMP AND THERMOSTAT HOUSING.
• Engine LDS-465-2.
• FRAME 2
• Thermostat Housing.
• FRAME 2
• OIL PRESSURE TRANSMITTER, COOLANT DRAIN COCK, AND OIL LEVEL GAGE AND SUPPORT TUBE.
• Engines LD-465-1, LD-465-1C, and LDT-465-1C.
• Oil Level Gage and Support Tube.
• Engines LD-465-1, LD-465-1C, and LDT-465-1C.
• OIL PRESSURE REGULATOR VALVE HOUSING ASSEMBLY.
• GENERATOR MOUNTING BRACKET.
• INTAKE MANIFOLD FLAME HEATER SYSTEM.
• Fuel Filter for Top Mounted-Covered Type Flame Heater.
• Fuel Pump and Ignition for Top Mounted-Covered Flame Heater
• FRAME 2
• FRAME 3
• FRAME 4
• Top Mounted-Uncovered Flame Heater Ignition Unit and Fuel Pump.
• FRAME 2
• FRAME 3
• Side-Mounted Flame Heater Fuel Pump, Filter, and Solenoid Valve Bracket Assembly.
• FRAME 2
• FRAME 3
• FRAME 4
• Intake Manifold Flame Heater Elbow.
• FRAME 2
• Engines LDS-465-1A and LDS-465-2.
• FRAME 2
• Engine LDS-465-1.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• INJECTION PUMP ADAPTER AND AIR COMPRESSOR SUPPORT.
• Injection Pump Adapter.
• AIR COMPRESSOR.
• Engine LDS-465-2.
• FRAME 2
• OIL COOLER AND OIL COOLER AND FILTER HOUSING.
• FRAME 2
• Oil Cooler
• TAPPET CHAMBER COVER.
• Engines LD-465-1, LD-465-1C, LDT-465-1C, and LDS-465-1A.
• Engine LDS-465-2.
• OIL FILTERS.
• CYLINDER HEAD COVERS AND CRANKCASE BREATHER ADAPTER.
• FRAME 2
• Engine LDS-465-2.
• FRAME 2
• Crankcase Breather Adapter.
• FRAME 2
• Engine LDS-465-2.
• FRAME 2
• FRAME 3
• HYDRAULIC PUMP OIL RESERVOIR.
• FUEL FILTER ASSEMBLY, FUEL TUBES, AND OIL HOSE.
• FRAME 2
• Engine LDS-465-1A.
• FRAME 2
• FRAME 3
• FRAME 4
• Engine LDS-465-1.
• FRAME 2
• FRAME 3
• FRAME 4
• Engine LDS-465-2.
• FRAME 2
• FRAME 3
• HYDRAULIC PUMP ASSEMBLY OR FUEL INJECTOR PUMP DRIVE GEAR ACCESS COVER.
• FRAME 2
• Engines LD-465-1. LD-465-1C, and LDT-465-1C.
• FUEL INJECTION PUMP ASSEMBLY.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• FRAME 8
• FRAME 9
• FRAME 10
• FRAME 11
• FRAME 12
• FRAME 13
• FRAME 14
• FRAME 15
• FUEL INJECTOR NOZZLE, HOLDER ASSEMBLY, AND RETURN TUBE.
• FRAME 2
• FRAME 3
• FUEL INJECTOR TUBE
• Injector Tube Clamp.
• FRAME 2
• FRAME 3
• TURBOCHARGER ASSEMBLY.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• Engine LDS-465-1.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• Engines LDS-465-1A and LDS-465-2.
• FRAME 2
• FRAME 3
• FRAME 4
• CONNECTION OF FUEL INJECTION PUMP.
• FRAME 2
• Engine LDS-465-1A.
• FRAME 2
• Engine LDS-465-1.
• FRAME 2
• FRAME 3
• Engine LDS-465-2.
• GENERATOR ASSEMBLY.
• FRAME 2
• Engines LD-465-1, LDS-465-1, and LDS-465-1A.
• FRAME 2
• Engine LDS-465-2.
• FRAME 2
• STARTER ASSEMBLY.
• Engines LDS 465-1, LDS 465-1A, and LDS 465-2.
• Chapter 6. DYNAMOMETER TESTS AND RUN-IN PROCEDURES
• MOUNTING ENGINE ON TEST STAND.
• Figure 6-1. Guide Bolt Fabrication Instructions.
• FRAME 2
• Figure 6-2. Flywheel Adapter Fabrication Instructions.
• FRAME 3
• FRAME 4
• Figure 6-3. Flywheel Rear Mounting Plate Fabrication Instructions.
• FRAME 5
• Mounting Engine
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• FRAME 8
• FRAME 9
• CONNECTING ENGINE TO DYNAMOMETER,
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• FRAME 8
• FRAME 9
• FRAME 10
• FLAME HEATER COMPONENT TEST.
• Flame Heater Nozzle Test.
• BASIC ENGINE RUN-IN.
• FRAME 2
• FRAME 3
• Engine Starting and Running Instructions.
• Test
• FRAME 2
• FRAME 3
• Run-In.
• Short run-in schedule
• Table 6-1. Run-In Schedule - Long (Models LD-465-1 and LD-465-1C)
• Table 6-2. Run-In Schedule - Long (Model LDT-465-1C)
• Table 6-3. Run-In Schedule - Long (Model LDS-465-1)
• Table 6-4. Run-In Schedule- Long (Model LDS-465-1A)
• Table 6-5. Run-In Schedule- Long (Model LDS-465-2)
• Tabnle 6-6. Run-In Schedule - Short (Models LD-465-1 and LD-465-1C)
• Table 6-7. Run-In Schedule - Short (Model LDT-465-1C)
• Table 6-8. Run-In Schedule - Short (Model LDS-465-1)
• Table 6-9. Run-In Schedule - Short (Model LDS-465-1A)
• Table 6-10. Run-In Schedule - Short (Model LDS-465-2)
• Final Run-In.
• FRAME 2
• FRAME 3
• FRAME 4
• DISCONNECTING ENGINE FROM TEST STAND.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• FRAME 7
• FRAME 8
• FRAME 9
• FRAME 10
• REMOVING ENGINE.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• Removing Engine Brackets.
• FRAME 2
• FRAME 3
• FRAME 4
• PLACING ENGINE IN SHIPPING CONTAINER.
• FRAME 2
• FRAME 3
• FRAME 4
• FRAME 5
• FRAME 6
• Appendix A. REFERENCES
• REFERENCES (cont)
• REFERENCES (cont)
• INDEX
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• INDEX-CONT
• The Metric System and Equivalents
• TM-9-2815-210-34-2-2
• Blank page
• Recommended Changes to Equipment Technical Publications
• Blank Page
• Recommended Changes to Equipment Technical Publications
• Recommended Changes to Equipment Technical Publications
• Recommended Changes to Equipment Technical Publications
• Recommended Changes to Equipment Technical Publications
• Blank Page
• Blank Page
• Recommended Changes to Equipment Technical Publications
• Blank Page
• Recommended Changes to Equipment Technical Publications
• Recommended Changes to Equipment Technical Publications
• Blank Page
• Recommended Changes to Equipment Technical Publications
• Distribution
• Recommended Changes to Equipment Technical Publications
• Recommended Changes to Equipment Technical Publications
• Recommended Changes to Equipment Technical Publications
• Blank Page

Privacy Statement - Press Release - Copyright Information. - Contact Us