Section V. MAINTENANCE OF TRANSMISSION TRANSFER POWER TAKEOFF

TM 9-2520-246-34-1

MAINTENANCE OF TRANSMISSION TRANSFER POWER TAKEOFF

Section V.

TOOLS :

Power train rebuild tool kit, pn 7950356

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

SUPPLIES :

White lead pigment, NSN 8010-00-290-6643

Universal gear lubricant, GO 80/90, MIL-L-2105

Lubricating oil, ICE, OE/HDO 10, MIL-L-2104

Safety wire, MS20995F47

Oil pump mounting gasket

Rear bearing retainer gasket

End play shim set

Rear bearing retainer oil seal

Shifter shaft preformed packing

Compressed air source, 30 psi max

PERSONNEL: TwO

Transmission transfer power takeoff on workbench.

EQUIPMENT CONDITION :

2-32. CLEANING BEFORE DISASSEMBLY. This paragraph gives instructions for

cleaning the transmission transfer power takeoff before disassembly. Note and scribe

transmission transfer power takeoff case in places that have oil soaked road mud. It

is not necessary to mark oil spots around gaskets or seals since new gaskets and

seals will be put in. Scrape, brush, and steam clean all dirt and road mud from

the transmission transfer power takeoff assembly.

2-346