Low Range Position.

TM 9-2520-246-34-1

Low Range Position.

FRAME 1

Pull shifter shaft (1) all the way out.

Rear output shaft (3) should turn. Front output shaft

Turn input shaft (2) by hand.

(4) should not turn.

If rear output (3) does not turn, do the following:

Remove top cover and shifter shaft. Refer to para 2-14k, frame 1.

Replace top cover and shifter shaft. Refer to para 2-22d, frame 1.

If front output shaft (4) turns, do the following:

a. Remove front output case assembly. For model T-136-27, refer to

para 2-14d. For model T-136-21, refer to para 2-14f.

Make sure that all parts are free to turn in front output case assembly.

c. Replace front output case assembly. For model T-136-27, refer to

para 2-22m. For model T-136-21, refer to para 2-22k.

END OF TASK

2-286