GENERAL INSPECTION

TM 9-2520-246-34-1

2-7. GENERAL INSPECTION. This paragraph gives instructions to check for

damage on the transmission case, cover, gearshafts, and gears.

CAUTION

It is easy to damage the equipment if you don't

know what you are doing. Do not try to do this

task unless you are experienced at it, or you

have an experienced person with you.

FRAME 1

NOTE

Small chips, burrs or scratches in housing castings

and transmission case can be repaired. Cracks in

housing castings that do not go into screw holes or

openings can be repaired. If parts are damaged in

any other way, throw parts away and get new ones.

Check that transmission case (1) does not have any broken bolts or stripped

threads. Mark them for repair.

Check that clutch release fork (2) is not cracked or bent.

Check that transmission case (1) , power takeoff access cover (3), counter-

shaft rear bearing cover (4) , retainer cap (5) , input shaft front bearing

cover (6) , and inspection cover (7) do not have cracks, chips, warped

areas or small holes.

GO TO FRAME 2

2-44