Installation. - TM-9-2320-366-20-31016

TM 9-2320-366-20-3

7-51. M1084/M1086 JACK CYLINDER PROXIMITY SENSOR REPLACEMENT (CONT)

b. Installation.

(1) Position nut (1) approximately 1 1/4 - 1 3/8 in. (3.2 -

3.5 cm) from bottom of proximity sensor (2).

(2) Position proximity sensor (2) in mounting bracket (3) with

nut (4).

(3) Adjust proximity sensor (2) until gap between fitting (5)

and proximity sensor is 3/16 in. (0.5 cm).

(4) Tighten nuts (1 and 4).

NOTE

Install plastic cable ties as required.

(5) Connect proximity sensor connector (6) to connector (7).

7-262