Installation. - TM-9-2320-366-20-30990

TM 9-2320-366-20-3

7-41. HEADLIGHT AND HOUSING REPLACEMENT/REPAIR/ADJUSTMENT (CONT)

d. Installation.

NOTE

Both headlights are installed the same way.

Left headlight shown.

(1) Position housing (1) on bumper (2) with three nuts (3).

(2) Tighten three nuts (3) to 60-72 lb-in. (7-8 Nm).

NOTE

Connectors for right side are P13, P14, and

P12.

(3) Install connectors P20, P19, and P4 (4) to back of

housing (1).

NOTE

Perform steps (4) through (6) to install lamp

only.

Connector numbers are the same on left and

right headlights.

(4) Connect connectors 18, 91, and 17 (5) on housing (1).

(5) Install lamp (6) in housing (1).

(6) Install retaining ring (7) on housing (1) with three screws

(8).

(7) Lower cab (TM 9-2320-366-10-1).

7-238