M1089 Backup Light Assembly Removal.

TM 9-2320-366-20-3

7-36. BACKUP LIGHT ASSEMBLY REPLACEMENT/REPAIR (CONT)

c. M1089 Backup Light Assembly Removal.

(1) Disconnect backup light connector (1) from connector

P87 (2).

(2) Remove screw (3), lockwasher (4), and terminal lug

TL47 (5) from bracket (6). Discard lockwasher.

(3) Remove screw (7), lockwasher (8), and backup light

assembly (9) from bracket (6). Discard lockwasher.

(4) Remove two self-locking nuts (10), lockwashers (11),

screws (12), and bracket (6) from bracket (13). Discard

lockwashers and self-locking nuts.

d. M1089 Backup Light Assembly Installation.

(1) Position bracket (1) on bracket (2) with two lockwashers

(3), screws (4), and self-locking nuts (5).

(2) Tighten two screws (4) to 35-43 lb-ft (48-58 Nm).

7-212