Adjustment. - TM-9-2320-366-20-30872

TM 9-2320-366-20-3

7-23. M1090/M1094 DUMP BODY SWITCH REPLACEMENT/ADJUSTMENT (CONT)

c. Adjustment.

WARNING

Wear appropriate eye protection when

working under vehicle due to the possibility

of falling debris. Failure to comply may

result in injury to personnel.

Ensure exhaust system is cool before

performing maintenance. Failure to comply

may result in injury to personnel.

(1) Loosen screw (1) in mounting plate (2).

(2) Position master power switch to on (TM 9-2320-366-10-

1).

NOTE

Step (3) requires the aid of an assistant.

(3) Push up on lever (3) until DUMP BODY UP indicator (4)

goes out.

(4) Tighten screw (1).

(5) Position master power switch to off (TM 9-2320-366-10-

1).

d. Follow-On Maintenance.

(1) Raise dump body and check that DUMP BODY UP

indicator is lit (TM 9-2320-366-10-1).

(2) Lower dump body and check that DUMP BODY UP

indicator goes out (TM 9-2320-366-10-1).

(3) Shut down engine (TM 9-2320-366-10-1).

End of Task.

7-130