Installation. (cont) - TM-9-2320-366-20-30824

TM 9-2320-366-20-3

7-11. WTEC III DASHBOARD CABLE ASSEMBLY REPLACEMENT/REPAIR (CONT)

(22) Remove screw (34), lockwasher (35), and four terminal

lugs (36) from PDP (2).

(23) Position four terminal lugs (36) and terminal lug TL41

(37) on PDP (2) with lockwasher (35) and screw (34).

(24) Tighten screw (34) to 35-45 lb-in. (4-5 Nm).

(25) Remove screw (38), lockwasher (39), and terminal lug

(40) from PDP (2).

(26) Position terminal lug (40) and terminal lug TL56 (41) on

PDP (2) with lockwasher (39) and screw (38).

(27) Tighten screw (38) to 35-45 lb-in. (4-5 Nm).

NOTE

Perform step (28) on M1088.

(28) Install terminal lugs TL502 (42) and TL501 (43) on

terminal studs (44 and 45) with two lockwashers (46)

and nuts (47).

NOTE

Perform step (29) on vehicles equipped with

cab radio.

(29) Connect connector P78 (48) to connector J78 (49).

7-82