Installation. - TM-9-2320-366-20-30760

TM 9-2320-366-20-3

7-6. AUXILIARY STARTER SOLENOID REPLACEMENT (CONT)

NOTE

Perform steps (3) and (4) on vehicle serial

number 7413 and higher, and vehicle serial

numbers 0001 through 7412 which have

previously had an auxiliary starter solenoid

replaced.

(3) Remove self-locking nut (10), washer (11), and screw

(12) from bracket (13). Discard self-locking nut.

(4) Remove self-locking nut (14), washer (15), clamp (16),

screw (17), and auxiliary starter solenoid (5) from bracket

(13). Discard self-locking nut.

NOTE

Perform step (5) on vehicle serial numbers

0001 through 7412 which have not previously

had an auxiliary starter solenoid replaced.

(5) Remove self-locking nuts (10 and 14), washers (11 and

15), screws (12 and 17), and auxiliary starter solenoid

(5) from bracket (13). Discard self-locking nuts.

b. Installation.

(1) Position auxiliary starter solenoid (1) on bracket (2) with

screw (3), clamp (4), washer (5), and self-locking nut (6).

(2) Position screw (7), washer (8), and self-locking nut (9) in

bracket (2).

(3) Tighten self-locking nuts (6 and 9) to 96-120 lb-in. (11-14

Nm).

7-24