Removal. (cont) - TM-9-2320-366-20-30734

TM 9-2320-366-20-3

6-14. ENGINE FAN AND FAN CLUTCH ASSEMBLY REPLACEMENT (CONT)

NOTE

Perform steps (8) and (8.1) on vehicles serial

number 8427 and higher and on vehicles that

have had the fan clutch replaced.

(8) Remove six nuts (10.1), lockwashers (10.2), and

washers (10.3) from engine fan (10.4).

Discard

CAUTION

Mark front of engine fan before removal. Failure

to comply may result in damage to equipment.

(8.1) Remove engine fan (10.4) from fan clutch assembly

(10.5).

NOTE

Application of 30 psi (207 kPa) air pressure to

fan clutch will free rotation of fan clutch and

allow removal of fan clutch screws.

Both fan clutches are removed the same way.

Fan clutch without studs shown.

(8.2) Install fitting (2) in fan clutch assembly (3).

(9) Apply 30 psi (207 kPa) air pressure to fitting (2).

(10) Turn fan clutch assembly (3) until bolts (11) are visible

through fan clutch access holes (12).

(11) Remove six bolts (11) from pulley damper (13).

(12) Remove fan clutch assembly (3) from pulley damper

(13).

6-76

Change 1