Installation. - TM-9-2320-366-20-30686

TM 9-2320-366-20-3

6-6. THERMOSTAT HOUSING REPLACEMENT (CONT)

b. Installation.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash with soap

and water. Failure to comply may result

in injury to personnel.

(1) Apply adhesive to threads of tee fitting (1) and fittings (2

and 3).

(2) Install fitting (2) in tee fitting (1).

(3) Install tee fitting (1) in thermostat housing (4).

(4) Install fitting (3) in thermostat housing (4).

(5) Install preformed packing (5) on 90-degree fitting (6).

(6) Install 90-degree fitting (6) in thermostat housing (4).

(7) Apply adhesive to surfaces of thermostat housing (4) and

engine block (7).

(8) Position gasket (8) on engine block (7).

(9) Install thermostat housing (4) on engine block (7) with

two screws (9).

6-30