Bottom Radiator Fan Shroud Installation. (cont)

TM 9-2320-366-20-3

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well ventilated area. If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water. Failure

to comply may result in injury to

personnel.

(10) Apply antiseize compound to threads of radiator

draincock (14).

(11) Install radiator draincock (14) in radiator (3).

(12) Loosen two screws (15) in clamps (16) as far as possible

without disengaging screws from D-nuts (17).

(13) Unhook clamp tabs (18) from tab windows (19).

CAUTION

Clamp tongue must be started in clamp groove.

Failure to comply may result in damage to

equipment.

Position clamps so that screws will be toward

center of vehicle and angled down.

(14) Position two clamps (16) on lower coolant hose (20).

Change 1

6-23