Installation. (cont) - TM-9-2320-366-20-30642

TM 9-2320-366-20-3

5-2. MUFFLER AND EXHAUST HEAT SHIELDS REPLACEMENT (CONT)

(6) Position two muffler straps (3) on muffler (4) with two

screws (5) and self-locking nuts (6).

(7) Position exhaust heat shield (7) on two muffler support

brackets (2) with four screws (8) and self-locking nuts

(9).

(8) Tighten four self-locking nuts (9) to 25-29 lb-ft (34-39

Nm).

NOTE

Step (9) requires the aid of an assistant.

(9) Install muffler (4) on two muffler support brackets (2) with

two rubber grommets (10), four rubber grommets (11),

two washers (12), screws (13), washers (14), and self-

locking nuts (15).

5-6