Installation. (cont) - TM-9-2320-366-20-30577

TM 9-2320-366-20-3

(13) Deleted.

(14) Deleted.

(15) Deleted.

(16) Deleted.

(17) Position preformed packing (25) and fuel level sending

unit (26) in fuel tank (23) with five screws (27).

(17.1) Tighten five screws (27) to 20-24 lb-in. (2-3 Nm).

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water. Failure

to comply may result in injury to

personnel.

(18) Apply sealing compound primer to threads of 90-degree

return fitting (28), 90-degree pickup tube fitting (29), and

relief valve (30).

(19) Apply sealing compound to threads of 90-degree return

fitting (28), 90-degree pickup tube fitting (29), and relief

valve (30).

(20) Install 90-degree return fitting (28) in fuel tank (23).

(21) Install 90-degree pickup tube fitting (29) in fuel tank (23).

(22) Install relief valve (30) in fuel tank (23).

Change 1

4-47