Particle Extraction Tube Removal.

TM 9-2320-366-20-3

4-2. INTAKE AIR CLEANER FILTER ELEMENT, AIR CLEANER ASSEMBLY, AND

PARTICLE EXTRACTION TUBE REPLACEMENT (CONT)

(24) Connect air filter restriction gauge hose (31) to air flow

sensor (32).

(25) Install connector J106 (33) and dust cap lanyard (34) on

chemical detector mounting bracket (35) with nut (36).

(26) Install dust cap (37) on connector J106 (33).

(27) Install four washers (38) and screws (39) in chemical

detector mounting bracket (35).

i. Particle Extraction Tube Removal.

(1) Loosen clamp (1) on particle extraction hose (2).

(2) Remove particle extraction hose (2) from particle

extraction tube (3).

(3) Remove self-locking nut (4) and screw (5) from bracket

(6). Discard self-locking nut.

(4) Loosen two clamps (7) on particle extraction hose (8).

(5) Remove particle extraction hose (8) from particle

extraction tube (3) and tailpipe (9).

4-20