 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-3
WARNING
Wear protective goggles to protect against
possible injury from release of high pressure
air. Failure to comply may result in injury to
personnel.
AIR PRESSURE TEST
NOTE
Tag air hose and connection point prior
to disconnecting.
(1) Disconnect input air hose from input 90
degree fitting of regulator valve.
(2) Connect input air hose to M1089 30K
winch pneumatic test adapter.
(3) Start engine (TM 9-2320-366-10-1) and
allow vehicle to build air pressure.
(4) Perform STE/ICE-R Test #50 and note
reading on STE/ICE-R.
(5) If 75-120 PSI (518-827 kPa) is not present,
replace air hose (para 23-5).
(6) Shut down engine (TM 9-2320-366-10-1).
(7) Drain air tanks (TM9-2320-366-10-1).
NOTE
Air pressure trapped in wrecker air
system will be released when
disconnecting input air hose from M1089
30K winch pneumatic test adapter.
(8) Disconnect input air hose from M1089 30K
winch pneumatic test adapter.
(9) Remove STE/ICE-R 0-1000 PSI transducer
from M1089 30K winch pneumatic test
adapter.
Change 1
2-2430.7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals