 |
|||
|
|
|||
|
Page Title:
AIR PRESSURE TEST STE/ICE-R TEST #50 |
|
||
| ||||||||||
|
|
 TM 9-2320-366-20-3
WARNING
Wear protective goggles to protect against
possible injury from release of high pressure
air. Failure to comply may result in injury to
personnel.
NOTE
Tag air hose and connection point prior to
disconnecting
AIR PRESSURE TEST STE/ICE-R TEST #50
(1) Remove STE/ICE-R 0-1000 PSI transducer
from M1089 30K winch pneumatic tester.
(2) Connect M1089 30K winch test adapter to
input tee fitting.
(3) Install STE/ICE-R 0-1000 PSI transducer in
M1089 30K winch test adapter.
(4) Connect input air hose to M1089 30K
winch test adapter.
(5) Disconnect air hose from input tee fitting.
(6) Remove tube nipple from M1089 30K
winch pneumatic test adapter.
(7) Connect M1089 30K winch pneumatic test
adapter to input tee fitting.
NOTE
Apply antiseizing tape to first two to five
threads of plug prior to installation.
(8) Install plug in M1089 30K winch pneumatic
test adapter.
(9) Start engine (TM9-2320-366-10-1) and
allow vehicle to build air pressure.
(10) Perform STE/ICE-R Test #50 and note
reading on STE/ICE-R.
(11) If 75-120 PSI (518-827 kPa) is not present,
repair or replace M1089 30K winch
pneumatic manifold (para 17-29).
(12) Shut down engine (TM 902320-366-10-1).
(13) Drain air tanks (TM9-2320-366-10-1).
(14) Remove plug from M1089 30K winch
pneumatic test adapter.
(15) Disconnect M1089 30K winch pneumatic test
adapter from input tee fitting.
(16) Install tube nipple on 30K winch pneumatic
test adapter.
(17) Connect air hose to input tee fitting.
(18) Disconnect input air hose from M1089 30K
winch test adapter.
(19) Remove STE/ICE-R 0-1000 PSI transducer
from M1089 30K winch test adapter.
(20) Disconnect M1089 30K winch test adapter
from input tee fitting.
(21) Connect input air hose to input tee fitting.
Change 1
2-2428.3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals