 |
|||
|
|
|||
|
Page Title:
NO SERVICE OR EXTERNAL HYDRAULIC POWER FROM M1089 (cont) |
|
||
| ||||||||||
|
|
 TM 9-2320-366-20-3
TM
WARNING
Drop hydraulic pressure to zero
before disconnecting any
hydraulic line. Failure to comply
may result in injury to
personnel.
Wear approved eye protection when
performing pressure checks. Failure
to comply may result in oil getting
into eyes. If oil contacts eyes, seek
medical attention immediately.
Fuel and oil are slippery and can
cause falls. Wipe up spilled fuel
or oil with rags. Failure to comply
may result in injury to personnel.
(1) Place drain pan under vehicle.
(2) Remove four screws, lockwashers and
washers from middle control panel
cover. Discard lockwashers.
(3) Remove two screws, washers,
lockwashers, nuts and middle control
panel cover from control panel.
Discard lockwashers.
(4) Check hydraulic hoses, tubes and fittings
from linear directional valve to slave and
external output ports.
(5) Position middle control panel cover on
control panel with two screws, washers
and nuts.
(6) Install four washers, lockwashers, and
screws in middle control panel cover.
2-2269/(2-2270 Blank)
2-2269/(2-2270
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals