DUMP BODY DRIFTS DOWN FROM RAISED POSITION (cont)

TM 9-2320-366-20-3

WARNING

Wear approved eye protection when

performing pressure checks. Failure to

comply may result in oil getting into eyes.

If oil contacts eyes, seek medical

attention immediately.

(1) Start engine (TM 9-2320-366-10-1).

(2) Position PTO switch to on

(TM 9-2320-366-10-1).

CAUTION

Keep tachometer within 1,250-1,450

RPM when PTO is engaged. Failure to

comply may result in damage to

equipment.

NOTE

In the event of a tachometer failure, a

HAND THROTTLE lever positioned to L is

approximately 1,250-1,450 RPM.

(3) Set engine speed to 1250-1450 RPM

(TM 9-2320-366-10-1).

(4) Toggle DUMP UP/DOWN switch to UP

position momentarily (TM 9-2320-366-10-1).

(5) Check hydraulic hoses and fittings for Class III

leaks.

NOTE

In the event of a tachometer failure, a

HAND THROTTLE lever positioned to L is

approximately 1,250-1,450 RPM.

(6) Set engine speed to 750 RPM

(TM 9-2320-366-10-1).

(7) Position PTO switch to off

(TM 9-2320-366-10-1).

(8) Shut down engine (TM 9-2320-366-10-1).

(9) If Class III leaks are present, replace leaking

hydraulic hose or fitting (para 19-15).

(10) If Class III leaks are not present, notify DS

Maintenance.

Change 2

2-2241/(2-2242 Blank)