CAB TILT, SPARE TIRE RETAINER, AND SUSPENSION COMPRESSION DO NOT OPERATE (cont)

TM 9-2320-366-20-3

WARNING

Drop hydraulic pressure to zero before

disconnecting any hydraulic hoses. Failure

to comply may result in injury to personnel.

Hydraulic fluid (MIL-H-5606) is TOXIC. Wear

protective goggles and gloves; use only in well

ventilated area; avoid contact with skin, eyes,

and clothes. Skin and clothing that come into

contact with hydraulic fluid should be washed

immediately. Saturated clothing should be

removed immediately. Failure to comply may

result in injury to personnel.

Compressed air used for cleaning purposes

will not exceed 30 psi (270 kPa). Use only

with effective chip guarding and personal

protective equipment (goggles, shields,

gloves, etc.). Failure to comply may result

in injury to personnel.

(1) Remove two plugs from air/hydraulic

manifold. Discard plugs.

(2) Remove two retainers, filters, and springs

from air/hydraulic manifold. Discard

retainers and springs.

(3) Inspect filters for debris or signs of damage.

(4) Discard filters.

(5) If filters are free from debris and damage,

repair or replace air/hydraulic manifold

(para 19-4).

(6) Position two springs and filters in hydraulic

manifold with two retainers.

(7) Install two preformed packings on plugs.

(8) Install two plugs in air/hydraulic manifold.

Change 1

2-2228.9