STEERING GEAR TEST - TM-9-2320-366-20-30167

TM 9-2320-366-20-3

Check power steering pump for leaks, and for loose,

missing, or damaged mounting hardware. Lower cab

(TM 9-2320-366-10-1). Shutdown engine (TM

9-2320-366-10-1). Raise cab (TM 9-2320-366-10-1).

NOTE

An alignment mark shall be marked

on yoke and steering gear assembly

to ensure ease during installation.

STEERING GEAR TEST

(1)

Remove bolt and self-locking nut from lower

yoke of steering gear arm. Discard self-

locking nut.

(2)

Remove yoke from top steering gear

assembly shaft.

(3)

Remove drag link (para 13-3).

(4)

Turn top steering gear assembly shaft to

check for binding and proper output.

Notify DS maintenance if steering gear

assembly fails to turn smoothly or if it

binds when top shaft is turned.

(5)

Install drag link (para 13-3).

(6)

Position yoke onto top steering gear

assembly shaft.

(7)

Install belt and self-locking nut into yoke to

secure yoke to top steering gear assembly

shaft.

2-2157