CONTINUITY TEST - TM-9-2320-366-20-30151

TM 9-2320-366-20-3

CONTINUITY TEST

(1)

Disconnect connector P110 from CTIS ECU.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

connector P111D.

(4)

Connect negative (-) probe of multimeter to

connector P110E and note reading on

multimeter.

(5)

If continuity is not present, repair wire 1528

(para 2-45) or replace CTIS cable assembly

(para 7-60).

(6)

If continuity is present, replace CTIS ECU

(para 12-6).

(7)

Connect connector P110 to CTIS ECU.

(8)

Connect connector P111 to connector J111.

(9)

Install kick panel (para 16-3).

2-2141/(2-2142 Blank)