CONTINUITY TEST - TM-9-2320-366-20-30135

TM 9-2320-366-20-3

CONTINUITY TEST

(1)

Remove kick panel (para 16-3).

(2)

Disconnect connector P110 from CTIS ECU.

(3)

Disconnect connector P111 from connector

J111.

(4)

Set multimeter to ohms.

(5)

Connect positive (+) probe of multimeter to

connector P110U.

(6)

Connect negative (-) probe of multimeter to

connector P111B and note reading on

multimeter.

(7)

If continuity is not present, repair wire 1528

(para 2-45) or replace CTIS cable assembly

(para 7-60).

2-2125