 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-3
TM
NOTE
Two steady mode lights are
an indication that the CTIS
has discontinued operation
because a particular
inflate or deflate sequence
has taken longer than limits
allow (40 minutes for inflate;
20 minutes for deflate).
Two steady mode lights indicate
that CTIS is shut off with air
pressure between modes.
The CTIS may still operate
including modes that are
lit, by manually pressing
the desired mode.
To perform deflate or
inflate checks throughout
this task, it may be
necessary to perform the
opposite function first
so that a desired mode
selection is available.
SOAPY WATER LEAK TEST
(1)
Remove kick panel (para 16-3).
(2)
Apply soapy water solution to supply
air hose fitting at manifold valve
assembly.
(3)
Check for air escaping at manifold
valve assembly, indicated by air
bubbles.
(4)
Remove two screws and washers from front
grille.
(5)
Remove screw and washer from front grille.
(6)
Remove front grille from cab.
(7)
Apply soapy water solution to supply
air hose from wet tank at cab floor.
(8)
Check for air escaping at cab floor
fittings, indicated by air bubbles.
2-2011
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals