|
|
TM 9-2320-366-20-2
WARNING
Wear protective goggles to protect against
possible injury from release of high pressure
air. failure to comply may result in injury
to personnel.
NOTE
Inspect air hoses and fittings for cracks,
kinks, nicks, stripped threads, and cuts.
(1) Loosen air hose at tailgate pneumatic
cylinder rear port.
(2) Check for presence of air at rear port.
(3) If air is not present, replace air hose
from tailgate pneumatic cylinder rear
port to solenoid valve port B (para 23-4).
(4) If air is present, replace tailgate
pneumatic cylinder (para 23-9).
(5) Tighten air hose on tailgate pneumatic
cylinder.
(1) Loosen air hose at pressure protection
valve.
(2) Check for presence of air at pressure
protection valve.
(3) If air is not present, replace pressure
protection valve (para 23-12).
(4) Tighten air hose on pressure protection
valve.
Change 1
2-1988.5
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |