|
|
TM 9-2320-366-20-2
(1) Disconnect dummy coupling from rear
emergency gladhand.
(2) Position emergency gladhand selector valve
handle to rear position (TM 9-232-366-10-1).
(3) Start engine (TM 9-2320-366-10-1).
(4) Push in TRAILER AIR SUPPLY control
(TM 9-2320-366-10-1).
(5) Check for presence of air at rear emergency
gladhand.
(6) Shut down engine (TM 9-2320-366-10-1).
(7) Connect dummy coupling to rear emergency
gladhand.
(8) Disconnect fifth wheel emergency gladhand
from dummy coupling.
(9) Position emergency gladhand selector valve
handle to fifth wheel position
(TM 9-232-366-10-1).
(10) Start engine (TM 9-2320-366-10-1).
(11) Push in TRAILER AIR SUPPLY control
(TM 9-2320-366-10-1).
(12) Check for presence of air at fifth wheel
emergency gladhand.
(13) Shut down engine (TM 9-2320-366-10-1).
(14) Connect fifth wheel emergency gladhand
to dummy coupling.
(15) If air is not present at both emergency
gladhands, go to step 4 of this fault.
Change 1
2-1976.43
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |