 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-2
WARNING
Prolonged contact with lubricating oil
(MIL-L-2104) may cause a skin rash. Skin
and clothing that come in contact with
lubricating oil should be thoroughly washed
immediately. Saturated clothing should be
removed immediately. Areas in which
lubricating oil is used should be well
ventilated to keep fumes to a minimum.
Failure to comply may result in injury to
personnel.
PRESSURE TEST
(1) Place drain pan under transmission oil
cooler tube.
(2) Disconnect transmission oil sampling hose
from 45 degree fitting.
NOTE
Note orientation of 45 degree fitting prior
to removal.
(3) Remove 45 degree fitting from transmission
oil cooler tube.
(4) Remove preformed packing from 45 degree
fitting. Discard preformed packing.
(5) Install adapter fitting in transmission
oil cooler tube.
(6) Install STE/ICE-R 0-1000 PSI transducer in
adapter fitting.
(7) Start engine (TM 9-2320-366-10-1).
(8) Perform STE/ICE-R Test # 50 and note
reading on STE/ICE-R.
(9) If pressure is less than 10 PSI, notify DS
Maintenance.
(10) Shut down engine (TM 9-2320-366-10-1).
(11) Remove STE/ICE-R 0-1000 PSI transducer
from adapter fitting.
(12) Remove adapter fitting from transmission
oil cooler tube.
(13) Install preformed packing on 45 degree
fitting.
(14) Install 45 degree fitting in transmission oil
cooler tube.
(15) Connect transmission oil sampling hose to
45 degree fitting.
(16) Remove drain pan from under oil cooler
tube.
Change 1
2-1710.3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals