 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-2
WARNING
Wear approved eye protection when
performing transmission pressure checks. If
oil contacts eyes, seek medical attention
immediately. Failure to comply may result in
injury to personnel.
PRESSURE TEST
(1) Position drain pan under pressure tap.
(2) Remove main pressure tap plug and
preformed packing from control valve
module.
(3) Connect tube to boss adapter, hose, and
pipe to tube adapter to clutch pressure
tap.
(4) Perform STE/ICE-R Test # 50 (TM 9-4910-
571-12&P).
(5) Start engine (TM 9-2320-366-10-1) and
run at idle.
(6) With parking brake applied, position
WTEC II TEPSS to R position then to N
position while assistant checks reading
on STE/ICE-R.
(7) Shut down engine (TM 9-2320-366-10-1).
(8) If main oil pressure is low, notify DS
Maintenance.
(9) Remove pipe to tube adapter, hose, and
tube to boss adapter from main pressure
tap.
(10) Position preformed packing and main
pressure tap plug in control valve module.
(11) Tighten main pressure tap plug to 84-120
lb-in. (9-14 Nm).
(12) Remove drain pan under pressure tap.
Change 1
2-1689
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals