 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-2
CAUTION
Use care when testing electrical connectors.
Do not damage connector pins or sockets
with multimeter probes. Failure to comply
may result in damage to equipment.
NOTE
Inspect connector pins/sockets for damage,
corrosion, and serviceability. Check that
connector pins are not pushed back and
are capable of making good contact.
CONTINUITY TEST
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
connector J115 socket 6.
(3) Connect negative (-) probe of multimeter to
connector J119 socket r and note reading
on multimeter.
(4) Connect negative (-) probe of multimeter to
all other sockets in connector J119 and
note reading on multimeter.
(5) Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(6) If continuity is not present in step 3, or
continuity is present in step 4 or step 5,
replace WTEC II cab transmission harness
(para 7-137).
Change 1
2-1597
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals