CONTINUITY TEST - TM-9-2320-366-20-20729

TM 9-2320-366-20-2

CONTINUITY TEST

(1)

Disconnect connector P210 from connector

J210.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

connector J912-15.

(4)

Connect negative (-) probe of multimeter to

connector J210-1 and note reading on

multimeter.

(5)

If continuity is not present, repair wire 1811

(para 2-45) or replace auxiliary panel cable

assembly (para 7-58).

(6)

If continuity is present, repair wire 1811

(para 2-45) or replace PTO cable assembly

(para 7-127).

(7)

Connect connector P210 to connector J210.

(8)

Connect connector P912 to connector J912.

(9)

Install personnel heater (para 18-9).

2-1537