 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-2
TM
WARNING
Remove rings, bracelets, watches,
necklaces, and any other jewelry
before working around vehicle.
Jewelry can catch on equipment
and cause injury or short across
electrical circuit and cause severe
burns or electrical shock.
VOLTAGE TEST
(1)
Remove PDP cover (para 16-2).
(2)
Remove circuit breaker CB22 from PDP.
(3)
Disconnect connector J209 from
transmission auxiliary oil cooler fan
connector.
(4)
Set multimeter to volts dc.
(5)
Connect positive (+) probe of multimeter to
connector J209-1.
(6)
Connect negative (-) probe of multimeter to
ground.
(7)
Start engine (TM 9-2320-366-10-1) and note
reading on multimeter.
(8)
If 24 vdc is not present, go to step 4 of this
fault.
(9)
Shut down engine (TM 9-2320-366-10-1).
CONTINUITY TEST
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
connector J209-2.
(3)
Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(4)
If continuity is not present, go to step 9 of
this fault.
(5)
If continuity is present, replace transmission
auxiliary oil cooler fan (para 8-19 or 8-21).
(6)
Connect connector J209 to transmission
auxiliary oil cooler fan connector.
(7)
Install circuit breaker CB22 in PDP.
(8)
Install PDP cover (para 16-2).
2-1511
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals